Products

NOTE: This kit will only fit 2012-2016 D-max/mu-X models.

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 16mm Screw in hose fittings
• Mounting brackets & hoses

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 16mm Screw in hose fittings
• Mounting brackets & hoses

This model is easily distinguised from eariler models by the red boost pipe from turbo charger.

HPD's 4WD intercooler kit is designed to give a increase in performance, reliability, consistent and sustainable power. HPD has also designed a transmission cooler kit to bolt in with our HPD intercooler, helping to maintain lower transmission tempatures with those increased loads while towing. 

By reducing inlet temperatures with the HPD intercooler kit you will you will see great improvements with engine tuning in most cases you will see upto 30% more power and torque with supporting modifications. 

Kit features:

• Bar & Plate Core 600x300x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Laser cut Mounting brackets
• Hot side piping 51mmø
• Cold side piping 57mmø to 63mmø intake

The late model D-MAX / MUX intercooler kit will fit 2016+ models that run the diesel particulate filter. 

How do i know if my kit is the late model or early model? 

The later dpf model vehicles will have a bright red hot side boost pipe from the turbocharger compressor cover down to the factory intercooler as shown in the image. 

HPD 's Isuzu D-MAX / MUX intercooler kits are as you can see nearly twice the size of the factory intercooler, have CNC Billet map sensor boss welded onto the intake pipe for perfiect sensor fitment. Heavy duty CNC mounting brackets so the intercooler will fit with factory oem rubber mounts to radiator support. the HPD intercooler is designed to give added performance, reliability, consistent and sustainable power, by reducing inlet temperatures you will also reduce engine running temperatures.

HPD has also designed a transmission cooler kit to bolt in with our HPD intercooler, helping to maintain lower transmission tempatures with those increased loads while towing. 

Kit features:

• Bar & Plate Core 600x275x76mm
• Alloy mandrel bent piping
• Quality silicone hoses
• German made load rated clamps
• Mounting bracket
• 1 year warranty

HPD's Isuzu D-max 2008-2012 front mount intercooler kit has all the specifications to increase your vehicles performance. Factory for this vehicle is a top mount intercooler which is restrictive and has limited cooling ability. This kit will help reduce inlet temperatures & exhaust gas temperatures by sustaining cooler air temps right through the rev range.

With engine tuning you will see the real benefits of fitting this HPD intercooler kit. Gains have been seen upwards of 30% torque and power.

Kit features:

• Bar & Plate Core 450x300x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Stainless steel laser cut Mounting brackets
• Bull bar compatible*
• Not Winch compatible
• 63mmø intercooler piping
• CNC machined map sensor boss

Factory Top Mount Intercooler Only

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 16mm Screw in hose fittings
• Mounting brackets & hoses

HPD’s Isuzu D-MAX’s top mount intercooler kits are designed to give a boost in performance, reliability, consistent and sustainable power. By reducing inlet temperatures, you will also reduce engine running temperatures. This HPD Kit includes a huge core and a unique CNC machined billet throttle body clamp which fits directly onto stock intake, billet CNC machined map sensor boss for perfect OEM fitment.

With engine tuning you will see the real benefits of fitting this HPD intercooler kit. Gains have been seen upwards of 30% torque and power.

Kit features:

• Bar & Plate Core 450x300x76mm
• 9" Thermo fan and wiring loom kit
• Alloy mandrel bent piping
• Stainless steel laser cut stainless brackets
• Quality silicone hoses and clamps
• Bonnet plate seal to suit factory scoop
• Billet CNC Machined throttle body clamp
• Billet CNC machined map sensor boss
• Hot side piping 51mmø