Products

Please note : The RC Colorado that this kit suits has a factory top mount intercooler

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 16mm Screw in hose fittings
• Mounting brackets & hoses

HPD's Holden Colorado RC 2008-2012 front mount intercooler kit has all the specifications to increase your vehicles performance. Factory for this vehicle is a top mount intercooler which is restrictive and has limited cooling ability. This kit will help reduce inlet temperatures & exhaust gas temperatures by sustaining cooler air temps right through the rev range.

With engine tuning you will see the real benefits of fitting this HPD intercooler kit. Gains have been seen upwards of 30% torque and power.

Kit features:

• Bar & Plate Core 450x300x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Stainless steel laser cut Mounting brackets
• Bull bar compatible*
• Not Winch compatible
• 63mmø intercooler piping
• CNC machined map sensor boss

HPD’s Holden Colorado’s top mount intercooler kits are designed to give a boost in performance, reliability, consistent and sustainable power. By reducing inlet temperatures, you will also reduce engine running temperatures. This HPD Kit includes a huge core and a unique CNC machined billet throttle body clamp which fits directly onto stock intake, billet CNC machined map sensor boss for perfect OEM fitment.

With engine tuning you will see the real benefits of fitting this HPD intercooler kit. Gains have been seen upwards of 30% torque and power.

Kit features:

• Bar & Plate Core 450x300x76mm
• 9" Thermo fan and wiring loom kit
• Alloy mandrel bent piping
• Stainless steel laser cut stainless brackets
• Quality silicone hoses and clamps
• Bonnet plate seal to suit factory scoop
• Billet CNC Machined throttle body clamp
• Billet CNC machined map sensor boss
• Hot side piping 51mmø

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 19mm Screw in hose fittings
• Mounting brackets & hoses

HPD intercooler kit is Specific to Colorado Early Model 2012-22 Oct 2013.

The kits differ in throttle body types, early 2013 has a pneumatic diaphragm, whereas late 2013 it has electronic solenoid on the throttle body. Please see images to confirm which model is required.

HPD's 4WD intercooler kit is designed to give a increase in performance, reliability, consistent and sustainable power. HPD has also designed a transmission cooler kit to bolt in with our HPD intercooler, helping to maintain lower transmission tempatures with those increased loads while towing. 

By reducing inlet temperatures with the HPD intercooler kit you will you will see great improvements with engine tuning in most cases you will see upto 30% more power and torque with supporting modifications. 

Kit features:

• Bar & Plate Core 600x300x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Laser cut Mounting brackets
• Hot side piping 51mmø
• Cold side piping 57mmø to 63mmø intake

HPD's 4WD intercooler kit is designed to give a increase in performance, reliability, consistent and sustainable power. HPD has also designed a transmission cooler kit to bolt in with our HPD intercooler, helping to maintain lower transmission tempatures with those increased loads while towing. 

The kits differ in throttle body types, early 2013 has a pneumatic diaphragm, whereas late 2013 it has electronic solenoid on the throttle body. Please see images to confirm which model is required.

By reducing inlet temperatures with the HPD intercooler kit you will you will see great improvements with engine tuning in most cases you will see upto 30% more power and torque with supporting modifications. 

Kit features:

• Bar & Plate Core 600x300x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Laser cut Mounting brackets
• Hot side piping 51mmø
• Cold side piping 57mmø to 63mmø intake

Transmission oil black, working you Transmission to the max with that 28ft caravan on the back?

HPD has you covered when it comes to keeping your transmission working reliably within safe operation temperatures.

These days most vehicle manufactures either run the transmission oil through a heat exchanger that is cooled by coolant used by the engine or run through the bottom tank of your radiator. This can have an impact on the engines cooling system and transmission temps when everything is working hard. The other issue being when either of these systems fail it can be quite detrimental and expensive when you have the two fluids mix together.

HPD’s oil to air transmission coolers have been designed and tested to provide stable transmission temperatures under the toughest conditions. Our bar and plate construction ensure that these cores will hold up in extreme environments under intense towing loads and still provide cool and stable transmission oil temperatures.

All HPD transmission cooler kits come with everything required to install on to your vehicle. Kit consist of transmission cooler, stainless steel laser cut bracketry, billet CNC adaptor plate, hose tail fittings, support clamps, insulation, oil hose, nuts, bolts, washers and installation instructions.

Key Benefits:

• Reduced / stable temperatures
• Prolong transmission oil life
• Lower engine coolant temperatures
• Reduced stress / strain on transmission
• Better fuel economy
• Extends transmission life

This kit is a complete and comprehensive kit including everything needed to do the install. 

We suggest that these kits be installed by a qualified mechanic to ensure safe and reliable operation.

 Kit features:

• Bar & Plate Core 300x200x50mm
• Lasercut stainless steel mounting brackets
• CNC Machined end tanks
• 10mmø hoses included

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 16mm Screw in hose fittings
• Mounting brackets & hoses

HPD’s Holden Rodeo RA intercooler kit have been designed due to the fact the factory piping and intercooler give many issues including split plastic piping and intercooler failure, resulting in lack of power and excess black smoke. HPD’s Rodeo intercooler will provide performance, reliability, consistent and sustainable power, by reducing inlet temperatures you will also reduce engine running temperatures.

Kit features:

• Bar & Plate Core 240x3000x76mm
• Alloy mandrel bent piping
• Quality silicone hoses and clamps
• Stainless steel mounting brackets
• This kit does not suit XROX bullbar

HPD’s Holden Rodeo’s top mount intercooler kits are designed to give a boost in performance, reliability, consistent and sustainable power. By reducing inlet temperatures, you will also reduce engine running temperatures. This HPD Kit includes a huge core and a unique CNC machined billet throttle body clamp which fits directly onto stock intake, billet CNC machined map sensor boss for perfect OEM fitment.

With engine tuning you will see the real benefits of fitting this HPD intercooler kit. Gains have been seen upwards of 30% torque and power.

Kit features:

• Bar & Plate Core 450x300x76mm
• 9" Thermo fan and wiring loom kit
• Alloy mandrel bent piping
• Stainless steel laser cut stainless brackets
• Quality silicone hoses and clamps
• Bonnet plate seal to suit factory scoop
• Billet CNC Machined throttle body clamp
• Billet CNC machined map sensor boss
• Hot side piping 51mmø