Products

Removes STD restrictive air box lid and increases flow. Enough air to support 200 rwkw with other supporting modifications.

Makes a big improvement at 120rwkw + (as this is the limit of the STD air box.)

“Protect your investment fit HPD’s oil separator kit.”

HPD’s Australian made billet CNC machined oil catch can / oil air separators have been designed to reduce the amount of oil from the engines crank case breather entering the intake system.

The issue is with the oil entering the intake system on modern diesel engines fitted with EGR (exhaust gas recirculation) where the exhaust gas valve is commanded by the ECM (engine control module) to open and allow exhaust gasses back into the inlet mixing with the oil that’s been left as a film inside the inlet manifold, thus this process just keeps on repeating itself, causing the issue of the manifold being blocked or clogged reducing the air flow to the engine’s cylinders, resulting in lack of performance, black smoke, engine wear and even engine failure.

HPD’s oil catch can / oil separators come in universal and complete kits with all required stainless steel laser cut bracketry, correct size hose tail fitting, washable internal stainless mesh filters, cut to size oil resistant hosing, bolts, nuts, washer, spring clamps and installation instructions for each vehicle.

Key Benefits:

• Reduces oil in intake system
• Allows intercooler to work efficiently
• Eliminates carbon & oil build up in inlet manifold
• Keeps inlet ports and valves clean
• Reduces engine wear
• Reduces exhaust smoke
• Maintains economy
• Keeps air and map sensors clean
• Maintains engine performance

Kit features:

• Billet Alluminum Catch can
• Internal stainless mesh filters
• Dipstick to check oil level
• Simply unscrew base to empty oil
• 12&16mm Screw in hose fittings
• Mounting brackets & hoses

This product is designed for your 2000 - August 2004 Nissan Patrol ZD30 with Direct Injection. The HPD Airflow Meter Housing is a direct replacement upgrade and has been designed to allow 30% more airflow so you can increase boost pressure without affecting the ECU signal.

This product is designed for your August 2004 - 2008 Nissan Patrol ZD30 with Direct Injection. The HPD Airflow Meter Housing is a direct replacement upgrade and has been designed to allow 30% more airflow so you can increase boost pressure without affecting the ECU signal.

HPD’s 4WD Nissan Patrol GU ZD30DI intercooler kits have been designed as the factory intercoolers are prone to leaking from where the end tanks are pressed together to the core with a rubber O-ring between, hence the reason why they do and are very likely to leak and cause engine running issues. HPD have designed a direct replacement larger and more efficient intercooler kit with a 9” thermo fan bolted underneath to keep cool at low driving speeds.

HPD’s intercooler kit improves torque and power just on its own but really show’s it potential in keeping cooler intake temps and egt’s when engine tuning modifications come into play. These top mount intercoolers are great right up to 130kw’s at the wheels. 

HPD intercoolers are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures, you will also reduce engine running temperatures.

Kit features:

• This Kit is a Direct replacement
• Bar & Plate Core 300x280x76mm
• 9" Thermo fan
• Quality silicone hoses
• Alloy mandrel bent piping
• German load rated clamps
• CNC Machined mounting brackets
• 63mmø intercooler piping
• 1 year warranty

Transmission oil black, working you Transmission to the max with that 28ft caravan on the back?

HPD has you covered when it comes to keeping your transmission working reliably within safe operation temperatures.

These days most vehicle manufactures either run the transmission oil through a heat exchanger that is cooled by coolant used by the engine or run through the bottom tank of your radiator. This can have an impact on the engines cooling system and transmission temps when everything is working hard. The other issue being when either of these systems fail it can be quite detrimental and expensive when you have the two fluids mix together.

HPD’s oil to air transmission coolers have been designed and tested to provide stable transmission temperatures under the toughest conditions. Our bar and plate construction ensure that these cores will hold up in extreme environments under intense towing loads and still provide cool and stable transmission oil temperatures.

All HPD transmission cooler kits come with everything required to install on to your vehicle. Kit consist of transmission cooler, stainless steel laser cut bracketry, billet CNC adaptor plate, hose tail fittings, support clamps, insulation, oil hose, nuts, bolts, washers and installation instructions.

Key Benefits:

• Reduced / stable temperatures
• Prolong transmission oil life
• Lower engine coolant temperatures
• Reduced stress / strain on transmission
• Better fuel economy
• Extends transmission life

HPD's Nissan Patrol GU ZD30 CRD / DI transmission cooler kit was designed as these transmissions are put through thier pace while tow heavy caravan / campers etc.

This kit is a complete and comprehensive kit including everything needed to do the install. 

We suggest that these kits be installed by a qualified mechanic to ensure safe and reliable operation.

 Kit features:

• Bar & Plate Core 300x300x50mm
• Lasercut stainless steel mounting brackets
• CNC Machined end tanks
• 10mmø hoses included
• 1 year warranty

NOTE: THIS AIR INTAKE KIT FITS NISSAN GU PATROL ZD30 DIRECT INJECTION DIESEL ONLY!
FOR COMMON RAIL MODELS SEE HERE >> LINK

HPD''s high flow air intake kit has been designed for those looking for increased flow, response and performance form their 3 litre Nissan Patrol direct injection diesel.
The factory OEM nissan intake hose is a ribbed plastic design. This factory hose is not only prone to going brittle and cracking but also creates drag along the side walls and restricts flow. Should the factory hose split you may be sucking in dust and debris into the turbo wearing the compressor blades.

HPD's hiflow air intake kit comes with:

- HPD billet CNC high flow air box lid with true 3" cobra neck connector
- Aluminium 3" mandrel bent piping
- Integrated billet air flow meter adaptor (round hole H009 type)
- 1/BSP threaded boss for vacuum reference with supplied 1/8 brass plug and 6mm boost hose tail for versatility
- German made, load rater hose clamps
- High quality silicone reducer elbow
- Colour installation instructions

This kit has been designed so that it can be easily installed. HPD have now added a 1/8 bsp boss in the underside of the air intake and a hose tail for those who are still running a factory boost solenoid as you will still require vacuum reference as the factory intake reservoir will be disconnected. 

We suggest to also install the HPD VNTC boost controller to stabilize boost fluctuation.

On 2004 Models - Please confirm square or round style AFM hole prior to ordering. Square hole please use CR listing in link above

NOTE: THIS AIR INTAKE KIT FITS EARLY NISSAN GU PATROL ZD30 DIRECT INJECTION ONLY!

HPD''s high flow air intake kit has been designed for those looking for increased flow and performance for there 3 litre Nissan Patrol Direct Injection. It also can be used to replace the factory hose that is know to go hard and split allowing dust into the turbo wearing the compressor blades. HPD's hiflow air intake kit comes with HPD's billet CNC adaptor flange, aluminium 3" piping with billet air flow meter adaptor welded on and all quality silicon hoses, clamps and fitting required.