Isuzu D-MAX / MU-X 3LT / Mazda BT-50 Intercooler 4JJ3 2020 +
The eagerly anticipated HPD Intercooler upgrade for current model D-Max/MU-X & Mazda BT-50 is finally here.
As you can see, it’s nearly twice the size of the factory intercooler.
During dyno testing, once warmed up, even after seven back-to-back power runs, the cold side temperatures out of the HPD intercooler were consistently 40°C compared to the OEM unit’s 65-70°C. This is a testament to the HPD Bar & Plate Core’s resistance to heat soak and superior cooling performance.
OEM Intercooler |
HPD Intercooler |
||
Hot Side Temp |
120-140°C |
Hot Side Temp |
125-140°C |
Cold Side Temp |
65-70°C |
Cold Side Temp |
40°C |
Featuring HPD’s exclusive Bar & Plate Core design with cast alloy tanks and HPD's unique 10mm thick “knuckle duster” mounting brackets, CNC machined from solid billet alloy.
Map sensor boss is also CNC Machined and welded onto the intake pipe for perfect sensor fitment.
Piping diameter is increased from the factory diameter of 2" (50mm) to 2.5" (63mm) for better breathing to enable improved performance and economy.
All these elements are bonded together by HPD’s rockstar fabrication team to create an intercooler like no other.
With superior durability and performance, HPD’s IK-DM4-F unit will easily outperform and outlast the OEM unit and are engineered to tackle tough Aussie offroad conditions.
HPD's intercooler is designed to give added performance, reliability, consistent and sustainable power, by reducing inlet temperatures, engine running temperatures are also reduced.
HPD has also designed a transmission cooler kit to bolt in with our HPD intercooler, helping to maintain lower transmission tempatures with those increased loads while towing. Transmission Cooler found here
Kit features:
- Bar & Plate Core 600x300x76mm
- Alloy mandrel bent piping
- Quality silicone hoses
- Load rated clamps
- 10mm Thick CNC Machined "Knuckle Duster" Mounting brackets
- 1 year warranty
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
SKU | IK-DM4-F |
---|---|
Mount | Front Mount Intercooler |
Make | Isuzu |
Model | D-Max 4JJ3 3.0L Late 2020 +, MU-X RJ 4JJ3 3.0L 2021- |